Introduction

You’re all set to enjoy your favorite playlist, but your Anker speaker keeps making an irritating popping noise when plugged in. This annoying issue can hamper your overall listening experience. Fear not, this guide is here to help. From identifying common causes to providing troubleshooting steps and long-term fixes, we’ll help you eliminate the frustrating popping noise from your Anker speakers.

Common Causes of Popping Noise

Understanding the root cause of the popping noise is crucial for effective troubleshooting. There are several common issues to consider:

  1. Electrical Interference: Many devices, like routers and microwaves, emit electromagnetic waves that can interfere with your speaker’s performance. This interference often manifests as popping or crackling sounds.

  2. Connection Issues: A loose or faulty connection can induce popping sounds. If the audio cable isn’t securely connected to either the speaker or the audio source, it can cause disruptions.

  3. Drivers and Firmware: Obsolete or corrupted drivers and firmware can lead to various audio issues, including popping noises. Ensuring that your speaker’s firmware is updated can help mitigate these problems.

  4. Power Supply Problems: If the power supply isn’t consistent, interruptions can cause the speaker to make popping sounds. This issue often arises when using non-original chargers or faulty power outlets.

  5. Damage to Internal Components: Over time, internal components can wear out or get damaged, which could lead to sound anomalies, including popping noises.

By recognizing these potential causes, you can narrow down the specific issue affecting your speaker. This understanding sets up the foundation for the troubleshooting steps and detailed fixes that come next.

anker speakers plugged in make popping noise

Initial Troubleshooting Steps

The first step is to try some basic troubleshooting techniques to resolve the popping noise.

  1. Check Connections: Ensure that all cables are securely connected. Unplug and re-plug the audio cable and power cord to establish a firm connection.

  2. Move Away from Interference: Relocate your speaker away from other electronic devices that might cause interference. This simple move can sometimes solve the problem instantly.

  3. Try a Different Outlet: Switch the power source. Plug your speaker into a different outlet to rule out power supply issues.

  4. Test with Another Device: Connect your speaker to another audio source to see if the issue persists. This can help you determine if the issue lies with the speaker or the original audio source.

  5. Reset the Speaker: Sometimes a soft reset can fix minor issues. Refer to the user manual to reset your Anker speaker correctly.

If these initial troubleshooting steps don’t resolve the issue, it’s time to get a bit more technical with specific fixes.

Detailed Technical Fixes

Now, let’s dive into some technical fixes for resolving the popping noise.

Firmware Update

  1. Identify Current Firmware: Check the current firmware version of your speaker.
  2. Visit Anker’s Website: Go to the official Anker support page.
  3. Download Update: Download the latest firmware update.
  4. Follow Instructions: Apply the firmware update as instructed. This process varies depending on the model, so pay attention to the guidelines.

Driver Update

If you’re using your Anker speaker with a computer:

  1. Device Manager: Open the Device Manager on your computer.
  2. Locate the Speaker: Find your Anker speaker in the list of devices.
  3. Update Drivers: Right-click on the speaker and select ‘Update driver.

Check for Software Issues

  1. Audio Settings: Navigate to the audio settings in your device’s control panel.
  2. Balance Check: Ensure the balance is set correctly. Imbalance can cause audio anomalies.
  3. Disable Enhancements: Audio enhancements could sometimes cause issues. Try disabling any audio enhancements and test again.

Power Supply and Cable Replacement

Faulty power supplies and cables are common culprits.

  1. Original Accessories: Always use original Anker cables and chargers.
  2. Check for Damage: Inspect cables thoroughly for any wear and tear. Replace damaged cables immediately.

Internal Component Check

For the technically inclined or if the above methods fail:

  1. Open the Speaker: Carefully open the speaker housing using appropriate tools.
  2. Inspect Components: Look for any obvious signs of damage.
  3. Consult a Professional: If you are unsure, it may be best to take the speaker to a professional repair service.

With these detailed technical fixes, you should be well on your way to resolving the popping noise issue.

Preventative Measures to Avoid Future Issues

An ounce of prevention is worth a pound of cure. Here are some tips to prevent future popping noises.

  1. Regular Firmware Updates: Regularly check for and install any firmware updates provided by Anker.
  2. Keep Accessories Original: Use only original Anker chargers and cables.
  3. Avoid Electromagnetic Interference: Keep your speaker away from devices that emit strong electromagnetic fields.
  4. Proper Storage: Store your speaker in a cool, dry place to avoid moisture and dust.

By following these measures, you can maintain your speaker’s performance and extend its lifespan, minimizing the chances of encountering popping noises again.

Conclusion

Tackling the popping noise in Anker speakers involves understanding the common causes, executing initial troubleshooting steps, applying detailed technical fixes, and taking preventative measures. By following this guide, you will have your Anker speaker working smoothly again, providing you with the premium sound quality you expect.

Frequently Asked Questions

Why does my Anker speaker make a popping noise when plugged in?

Popping noises usually stem from issues like electrical interference, faulty connections, outdated firmware, or power supply problems.

Can software updates fix the popping noise in my Anker speaker?

Yes, updating firmware and drivers can resolve many audio issues, including popping noises. Always ensure your devices have the latest updates.

What should I do if my Anker speaker still makes noise after troubleshooting?

If basic troubleshooting doesn’t help, try advanced technical fixes, including checking and updating firmware, replacing cables, or consulting a professional for internal component inspection.